Cast Iron Process Centrifugal Pumps│株式会社丸八ポンプ製作所

Cast Iron Process Centrifugal Pumps detail_11

TOP > English TOP > Products > Centrifugal Pumps > Cast Iron Process Centrifugal Pumps

The back pull-out type enables easy disassembly and inspection without disconnecting piping.
Applicable to a wide range of fluids, including fresh water, special liquids, refrigerants, heat medium, etc.
Shaft Seals and materials can be customized to suit pumped liquids best.

※The standard material is cast iron. Stainless steel casing SCS13 & SCS14 are also available at your request.

　Other special materials are also available.

Bore	32×25mm　～　100×80mm
Discharge Volume	30L/min　〜　2000L/min
Total Head	5m　〜　110m
Shaft Seal	Mechanical Seal/Gland Packing
Motor Pole	4P（1450min⁻¹/50Hz　1750min⁻¹/60Hz) 2P（2900min⁻¹/50Hz　3500min⁻¹/60Hz）

CHS is firmly supported with a bracket with legs. So the vibration from the piping does not directly affect the pump's bearing and motor.
Semi open type impeller is also available at your request.

※The standard material is cast iron. Stainless steel casing SCS13/SCS14 and other special materials are available upon request.

Bore	125×125mm　〜　300×250mm
Discharge Volume	1200L/min　〜　14000L/min
Total Head	7m　〜　73m
Shaft Seal	Mechanical Seal/Gland Packing
Motor Pole	4P（1450min⁻¹/50Hz　1750min⁻¹/60Hz) 2P（2900min⁻¹/50Hz　3500min⁻¹/60Hz)

Please ask us anything about pumps.